Kernel panic

[Stephen Liu]

Hi Nathan,

At 10:15 AM 12/1/2002 -0500, Nathan Meyers wrote:
> > I did not do anything on this disk which is mounted on a mobile rack 
> having
> > been idle for sometimes.  2 day before I plug the tray (this mobile rack)
> > into its housing then the nightmare started.
>
>So this was a working RH installation, the disk was unused for awhile,
>and hasn't booted since you tried putting it back into service?
>
>Does the configuration match what you had before - for example, it was
>the master device on the primary IDE when it worked before, and is still
>the master device on the primary IDE? Is there anything that might have
>changed since you had it working?

No. I have not touched anything on this drive in question before I took 
action to fix this kernel panic problem.

My late discovery was that I have re-arranged the RAM, taking out some RAM 
cartridges and replace them with another reducing total RAM from 384MB to 
256MB.  However this box still works with another hard disk (WinME).

Have you had any idea how to fix the problem?

Thanks

Stephen





>Nathan
>
> > B.Regards
> > Stephen Liu
> >
> >
> > At 08:30 AM 12/1/2002 -0500, Nathan Meyers wrote:
> > >On Sun, Dec 01, 2002 at 09:13:28PM +0800, Stephen Liu wrote:
> > >> Hi all folks,
> > >>
> > >> When starting RH7.3 the screen hanged on :
> > >> Kernel panic: No init found. Try passing init=option to kernel.
> > >>
> > >> Used rescue disk to start trying to mount without success....
>_______________________________________________
>Discuss mailing list
>Discuss at blu.org
>http://www.blu.org/mailman/listinfo/discuss