Small Network Setup
Zoqix
zoqix at yahoo.com
Wed Jul 25 03:49:12 EDT 2001
Hi all,
I'm setting up the following network.
The problem is that I can ping 10.0.1.2 and 10.0.1.3 from the router but can't ping 10.0.1.4. I can ping 10.0.1.2 and 10.0.1.3 from PC1 but can't ping 10.0.1.1.
Another problem is that I have to ping 10.0.1.2 and 10.0.1.3 from the router first before pinging 10.0.1.1 from Gateway1 else I'll get Destination Unreachable.
Why is this so?
(eth0:161.111.139.71) (eth1:10.0.1.1) (eth0:10.0.1.2) (eth1:10.0.1.3) (eth0:10.0.1.4)
Internet <-----------------------------------> Router <-------------------------------------------------------------------> Gateway1 <--------------------------------------> PC1
<-------------------------------------------------------------------> Gateway2
(eth2:10.0.2.1) (eth0:10.0.2.2)
I'm running ip-masq on the Router with allowing 10.0.0.0/16 to go out to internet.
The following are the routing entries:
Router :
Destination Gateway Mask Interface
10.0.2.1 0.0.0.0 255.255.255.255 eth2
10.0.1.1 0.0.0.0 255.255.255.255 eth1
10.0.1.0 0.0.0.0 255.255.255.0 eth1
10.0.2.0 0.0.0.0 255.255.255.0 eth2
161.111.139.0 0.0.0.0 255.255.255.0 eth0
0.0.0.0 161.111.139.3 0.0.0.0 eth0
Gateway1:
Destination Gateway Mask Interface
10.0.1.1 0.0.0.0 255.255.255.255 eth0
10.0.1.2 0.0.0.0 255.255.255.255 eth0
10.0.1.0 0.0.0.0 255.255.255.0 eth1
0.0.0.0 10.0.1.1 0.0.0.0 eth0
Gateway1:
Destination Gateway Mask Interface
10.0.2.1 0.0.0.0 255.255.255.255 eth0
10.0.2.2 0.0.0.0 255.255.255.255 eth0
0.0.0.0 10.0.2.1 0.0.0.0 eth0
PC1:
Destination Gateway Mask Interface
10.0.1.0 0.0.0.0 255.255.255.0 eth0
0.0.0.0 10.0.1.1 0.0.0.0 eth0
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.blu.org/pipermail/discuss/attachments/20010725/83e0e320/attachment.html>
More information about the Discuss
mailing list