followup from nite with SAMBA

[Mike Bilow]

Glenn Burkhardt wrote in a message to Mike Bilow:

 GB> This is definitely a problem.  The 'link' LED's will light
 GB> up when you have a good connection between your network card
 GB> and the hub.  Most hub's have link lamps, too.

Althought your comment is correct in the context of the Intel EtherExpress Pro
which was the subject of the posting, it is not generally true of all Ethernet
cards any longer.  In particular, firmware-dependent cards such as those based
upon the DEC Tulip chipset (2104x) will NOT light their LEDs until and unless
their firmware has been loaded successfully after power-on; prior to firmware
load, they are just paperweights.
 
-- Mike


-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).