Thanks for all your help (was: URGENT! Server can't access net anymore)

[Bill Horne]

David Kramer wrote:
> 
> The problem was that the PCI PNP code switched the ethernet cards on me
> (eth0 -> eth1 and eth1 -> eth0).
> 
> I tried several things to fix it "the right way", including boot prompt
> parameters, lilo append=, and conf.modules.  None of them worked.
> 
> At last night's BLU meeting (http://www.blu.org), everyone told me to
> just give up and swap the network cards in their PCI slots.  So after
> the meeting I waved my white flag and did that.  Of course that worked,
> and now my server is up again.
> 

David - thanks for sharing the solution.  I'm a newbie, so I'll ask the
group to explain a couple of things.

1. What does Plug-'n'-play do with interrupts?  I always thought they
were cast in stone until I changed firmware/jumpers on a particular
card.

2. Why would swapping the PCI slot cure this problem?  Wouldn't the
problem follow the card if the interrupts are mismatched?

3. Does a cable modem require a reset to recognize a new MAC address? 
Does the reset, if needed, have to come from the head end, or can they
be reset locally?

Thanks in advance.

Bill Horne
-
Subcription/unsubscription/info requests: send e-mail with
"subscribe", "unsubscribe", or "info" on the first line of the
message body to discuss-request at blu.org (Subject line is ignored).